2023.02.28
Many power plants use fossil fuels and high-speed turbines to generate electricity. Gate valves are the preferred choice for power plant on/off applications. Other valves are sometimes used, such as globe valves. High performance ball valves are widely popular for use in the power industry.
2023.02.28
Water plants require relatively low pressure levels and ambient temperatures. As the water temperature is ambient, rubber seals and elastomers can be used which are not suitable elsewhere. These types of materials allow for the hermetic installation of water valves to prevent leaks.
2023.02.28
Piping systems for offshore production facilities and oil rigs contain a large number of valves. These valve products are available in a wide range of sizes to meet all flow control challenges.
2023.02.28
Wastewater pipelines collect waste solids and fluids and direct them to wastewater treatment plants. Wastewater treatment plants use low pressure piping and valves to work, and in many cases the requirements for wastewater valves are more lenient than those for clean water.
2022.11.25
According to the position of the branch pipe, the position of the opening is reasonably determined, and the position of the socket of the FRP pipe is avoided as much as possible, and the better position in the middle of the pipe body is preferred;
2022.11.18
Introduction of installation position and type of water supply pipe valve
Install the valve in the water supply pipe as follows: 1. Introduce into the pipe section; 2. The node of the outdoor loop pipe network of the residential area shall be set according to the separation requirements;












